Skip to content
Call (719) 963-7440
Silver StagExteriors

Fountain, CO · El Paso County

Cabinet Painting & Refinishing in Fountain

The short answer

Cabinet Painting & Refinishing in Fountain, CO: Doors removed, degreased, deglossed and sprayed in a cabinet-grade coating, with a cure schedule that means the finish actually hardens.

What it costs
A standard kitchen generally runs 3,000 to 6,000 dollars depending on door count, detail and whether grain filling is needed. Large or highly detailed cabinetry goes higher. Count your doors and drawers before comparing quotes, since that is the number the price actually tracks.
What is included
Doors and drawer fronts removed, labeled and sprayed off site or in a controlled space; Degreasing, which is a separate step from cleaning and is where most jobs fail; Deglossing or sanding so the primer has something mechanical to hold; Bonding primer appropriate to the existing finish; Sprayed cabinet-grade finish, not brushed wall paint; Boxes and face frames coated in place with full masking; Reassembly, with new hardware fitted if you are changing it.
Where we work
Fountain and the surrounding El Paso County, including Cross Creek, Countryside, Ventana.
Getting a quote
Free and no obligation. Call (719) 963-7440 or request a quote online.

Cabinet refinishing is the highest-return money in a kitchen and the easiest work to do badly. The failure mode is always the same: someone brushes wall paint onto a greasy door, it looks acceptable for a month, then it chips at every fingernail and peels around the handle. The difference is degreasing, deglossing, the coating itself, and giving it time to cure.

What is included

  • Doors and drawer fronts removed, labeled and sprayed off site or in a controlled space
  • Degreasing, which is a separate step from cleaning and is where most jobs fail
  • Deglossing or sanding so the primer has something mechanical to hold
  • Bonding primer appropriate to the existing finish
  • Sprayed cabinet-grade finish, not brushed wall paint
  • Boxes and face frames coated in place with full masking
  • Reassembly, with new hardware fitted if you are changing it

How we do it

  1. 1

    Strip it down and label it

    Every door and drawer numbered against its opening. Cabinet boxes are rarely square after twenty years and doors go back where they came from or they do not sit right.

  2. 2

    Degrease properly

    Kitchen cabinets carry an invisible film of cooking oil, heaviest around the range and above the handles. Nothing bonds to it. This step is the single biggest predictor of whether a cabinet finish lasts.

  3. 3

    Prime for the substrate you actually have

    Thermofoil, laminate, factory-catalyzed finish and raw maple all need different bonding primers. Getting this wrong is why finishes peel in sheets a year later.

  4. 4

    Spray, then let it cure

    Sprayed for a finish with no brush texture. Then it cures. Most cabinet coatings are dry to touch in hours and not fully hard for days to weeks, and putting the kitchen straight back into service is how a good job gets damaged in its first week.

What it costs

A standard kitchen generally runs 3,000 to 6,000 dollars depending on door count, detail and whether grain filling is needed. Large or highly detailed cabinetry goes higher. Count your doors and drawers before comparing quotes, since that is the number the price actually tracks.

We quote Fountain properties before starting, and the number you hear is the number you pay. If something on site changes the scope, you hear about it before we do the work rather than on the invoice.

Neighborhoods we serve in Fountain

Cross Creek, Countryside, Ventana, and everywhere else in Fountain.

Fully Insured
Free Photo-Documented Inspection
Written Scope Before You Sign
Locally Owned & Operated

Cabinets questions from Fountain

How long does a kitchen take?

Typically 4 to 7 days for a standard kitchen, longer for large or heavily detailed cabinetry. You will be without doors for part of that, and boxes stay usable for most of it.

Can you paint oak cabinets without the grain showing?

Only with grain filling, which is real additional labor. Oak has deep open pores and paint does not bridge them, so without filling you get a painted oak look — smooth to touch, visibly grained. Some people want that. Decide before, not after, and get it stated in the quote.

Can laminate or thermofoil cabinets be painted?

Laminate can, with the correct bonding primer, and it holds up well. Thermofoil is riskier because the vinyl layer can lift from the substrate with heat, and it frequently already has around the ovens. We will tell you honestly if yours is a poor candidate rather than take the job and hope.

How does the cost compare to new cabinets?

Broadly a quarter to a third the cost of replacement, sometimes less. It is the right call when the boxes are sound and the layout works, and the wrong call when you dislike the layout — no finish fixes a kitchen you do not want to stand in.

Cabinet Painting & Refinishing in Fountain

Free quote, an honest answer about what is achievable, and no pressure either way.