Falcon, CO · El Paso County

Fascia & Soffit Repair in Falcon

The short answer

Fascia & Soffit Repair in Falcon, CO: Repair or replacement of the boards behind and beneath your gutters, plus the water problem that rotted them in the first place.

What it costs: Fascia replacement is priced per linear foot and depends heavily on height, board dimension and how much gutter has to come down. Isolated sections are a modest job. A full perimeter replacement on a two-story house is a substantial one, and worth pairing with gutter replacement if the gutters are aging.
What is included: Removal and replacement of rotted fascia board; Soffit repair, including panels damaged by ice or animals; Drip edge or gutter apron fitted so water cannot wick behind the fascia; Correcting the drainage fault that caused the rot; Restoring soffit vent airflow where repairs or insulation have blocked it; Priming and painting, or wrapping in aluminum coil.
Where we work: Falcon and the surrounding El Paso County, including Meridian Ranch, Woodmen Hills, Latigo Trails.
Getting a quote: Free and no obligation. Call (719) 963-7440 or request a quote online.

Fascia is the board your gutters hang from, and soffit is the underside of the overhang. They fail from water, and the water is almost always coming from a gutter that overflowed, a missing drip edge, or a downspout joint that has been dripping down the wall for two years. Replacing the board without finding that is a repair with an expiry date.

What this means in Falcon specifically

What ends up in the gutters here

Minimal mature tree cover across the newer developments, so organic loading is genuinely light and gutter guards are frequently not worth the money here. What does accumulate is wind-driven plains grit and shingle granules, which settle into a dense sludge in the bottom of the trough. That holds water rather than blocking flow, and it is the reason a gutter can look clear from the ground and still be rotting from the inside.

Where the water has to go

Flat, open ground with little natural fall, which means surface water does not leave on its own the way it does on a slope. Downspout discharge needs real length here because there is no grade doing the work for you, and the newer subdivisions were graded to a plan that a decade of settling has often quietly undone.

Siding and paint substrates here

Predominantly stucco and vinyl with painted trim, on homes now old enough that original caulk joints are failing. The paint problem here is almost always trim and joints rather than the field.

Snow load and ice damming

Snow tends to blow rather than accumulate. Drifting against parapets, valleys and north-facing slopes causes uneven load and localised ice damming, while adjacent exposed sections stay bare.

Falcon sits at approximately 6,900 feet.

What is included

Removal and replacement of rotted fascia board
Soffit repair, including panels damaged by ice or animals
Drip edge or gutter apron fitted so water cannot wick behind the fascia
Correcting the drainage fault that caused the rot
Restoring soffit vent airflow where repairs or insulation have blocked it
Priming and painting, or wrapping in aluminum coil

How we do it

1
Find the water first
Rot is evidence. We work out where the water was coming from before pricing the carpentry, because otherwise you will be paying for the same board again.
2
Take out everything soft
Rot travels along the grain past where it is visible. We cut back to sound wood, which sometimes means a longer section than the stain suggests.
3
Rebuild and detail properly
New board, primed on all six faces before it goes up including the cut ends, then drip edge so the water that caused the problem cannot repeat it.
4
Re-hang the gutter correctly
The run goes back on hidden hangers at proper pitch, not back onto the old spike holes.

What it costs

Fascia replacement is priced per linear foot and depends heavily on height, board dimension and how much gutter has to come down. Isolated sections are a modest job. A full perimeter replacement on a two-story house is a substantial one, and worth pairing with gutter replacement if the gutters are aging.

We quote Falcon properties before starting, and the number you hear is the number you pay. If something on site changes the scope, you hear about it before we do the work rather than on the invoice.

Neighborhoods we serve in Falcon

Meridian Ranch, Woodmen Hills, Latigo Trails, and everywhere else in Falcon.

Fully Insured

Free Photo-Documented Inspection

Written Scope Before You Sign

Locally Owned & Operated

Fascia & Soffit questions from Falcon

Can you replace fascia without removing the gutters?

No, and anyone who says yes is not replacing the fascia. The gutter hangs on it. Removal and re-hang is part of the job, which is why it is worth combining fascia work with gutter replacement if both are near the end of their life.

Should I wrap fascia in aluminum?

Coil wrap protects the board and removes repainting from your maintenance list. It also hides the board, which means the next round of rot is invisible until it is severe. On a well-detailed roof with a working gutter it is a reasonable choice. On a house with a history of overflow, fix the drainage first or you are wrapping a problem.

Why do birds and squirrels keep getting into my soffit?

Because there is a gap, usually at a corner or where the soffit meets the fascia, and often opened by earlier water damage. Sealing it without checking for an active nest is both cruel and a mistake, since anything trapped inside dies in the cavity. We check first.

Is soffit venting worth restoring?

Yes, and it is one of the most commonly wrecked details on older houses. Blown attic insulation pushed out over the top plate blocks intake vents constantly. Without intake, ridge vents cannot work, and the attic runs hot in summer and damp in winter. It is also directly implicated in ice damming.

Related work in Falcon

Often booked together

Fascia & Soffit in nearby communities

All gutters in Falcon →Everything we do in Falcon →