Skip to content
Call (719) 963-7440
Silver StagExteriors

Exterior & Interior Painting in Colorado Springs, CO

The short answer

Exterior & Interior Painting in Colorado Springs, CO: Exterior and interior painting where the preparation is the job. At 6,000 feet the sun destroys anything applied over chalked, unwashed, or unprimed surfaces.

Types of work
Exterior House Painting; Cabinet Painting & Refinishing; Stucco Painting & Repair; Interior House Painting; Wood Siding & Trim Painting; Deck & Fence Staining; Log & Cedar Home Staining; Commercial Painting.
Where we work
Colorado Springs and the surrounding El Paso County, including Briargate, Rockrimmon, Old Colorado City.
Getting a quote
Free documented inspection, no obligation. Call (719) 963-7440 or request a quote online.

Silver Stag Exteriors provides exterior painting throughout Colorado Springs and the surrounding El Paso County area. Almost every exterior paint failure in Colorado is a preparation failure, not a paint failure. At this elevation UV intensity runs roughly 25 percent above sea level, and a coating applied over chalked siding, unwashed surfaces, or bare wood without primer will fail in two or three seasons no matter whose paint is in the can. We spend most of the labor on the part you cannot see once it is finished.

What matters specifically in Colorado Springs

Housing stock

A wide spread of housing stock, from pre-war homes near Old Colorado City to large 1990s and 2000s subdivisions across Briargate and Powers. Many of those subdivision roofs are now on their second or third replacement cycle.

Weather exposure

Sits in one of the most active hail corridors in the United States. El Paso County regularly records damaging hail between May and August, and intense high-altitude UV accelerates shingle and paint degradation year round.

Areas we serve here

Briargate, Rockrimmon, Old Colorado City, Broadmoor, Powers, Stetson Hills, Cheyenne Cañon, and the rest of Colorado Springs.

Why Colorado Springs homeowners call us

Preparation is most of the labor

Wash, scrape, sand, caulk, and prime bare substrate before any finish coat. On a typical repaint this is more hours than the painting itself, and it is the difference between five years and fifteen.

Coatings rated for this elevation

Colorado UV chews through builder-grade paint. We specify 100 percent acrylic exterior coatings with the film build and UV package to survive it, and we tell you what the manufacturer actually warrants.

Rot and substrate repair before coating

Paint does not fix soft trim. We identify and replace failed wood, re-caulk joints, and correct the moisture path before anything is coated over it.

Written color and sheen schedule

Body, trim, accent, doors, and sheen for each, agreed in writing before we start. Colour disputes on a finished house are miserable for everyone.

How the work goes

  1. 1

    Walk and substrate assessment

    We photograph every elevation, identify chalking, failed caulk, rot, and prior coating failures, and tell you honestly whether the surface needs a repaint or a repair first.

  2. 2

    Written scope and color schedule

    Line by line: what gets washed, scraped, primed, caulked and coated, how many coats, and the exact products. You approve colors before any material is ordered.

  3. 3

    Preparation

    Pressure or soft wash, scrape and sand failing areas, replace rotted trim, caulk joints, spot prime or full prime bare and repaired substrate, and mask everything that is not being painted.

  4. 4

    Application

    Spray, back-roll or brush as the surface requires, to the manufacturer film thickness. Cut lines by hand where they matter.

  5. 5

    Walkthrough before payment

    We walk every elevation with you and fix punch items before the final invoice, not after.

Fully Insured
Free Photo-Documented Inspection
Written Scope Before You Sign
Locally Owned & Operated

Painting specialties in Colorado Springs

These are different jobs, priced and performed differently. Each page covers what that specific work involves in Colorado Springs.

Painting questions from Colorado Springs homeowners

How long should an exterior paint job last in Colorado?

Seven to ten years on a properly prepared surface with a quality acrylic. Three to five if it was applied over chalked or unwashed siding. The paint is rarely the variable; the preparation almost always is. South and west elevations fail first because they take the most UV.

Do you have to pressure wash first?

The surface must be clean, and on most exteriors washing is how you get there. Pressure is not always the right tool though. Old siding, soft wood, and stucco often need a soft wash at low pressure, because forcing water behind the cladding causes a much worse problem than dirty paint.

Can you paint in the winter here?

Exterior painting needs surface and air temperatures above the product minimum, usually 35 to 50 degrees depending on the coating, and falling temperatures overnight matter as much as the daytime high. In Colorado Springs that realistically means April through October for exteriors. Interior work runs year round, which is why we schedule interiors through the winter.

Is one coat ever enough?

On a color-matched repaint over sound existing coating, sometimes. Going lighter over dark, covering bare or primed substrate, or any significant color change needs two. Anyone quoting one coat on a color change is quoting a job that will look thin within a year.

What about lead paint?

Homes built before 1978 may contain lead-based paint, and disturbing it is regulated under the EPA Renovation, Repair and Painting rule. We test where the age of the home warrants it and follow the required containment practices. If a home tests positive we will tell you what that changes about the scope and the cost.

Get a free painting inspection in Colorado Springs

Documented with photos, no obligation, and an honest answer about whether you need the work at all.