Skip to content
Call (719) 963-7440
Silver StagExteriors

Woodland Park, CO · Teller County

Deck & Fence Staining in Woodland Park

The short answer

Deck & Fence Staining in Woodland Park, CO: Stripping, cleaning and brightening before anything is applied, and honest guidance on which decks are past coating.

What it costs
Generally 3 to 7 dollars per square foot depending on whether the old coating strips easily, how much railing there is, and the board condition. Railings and balusters cost more per square foot than decking because they are almost all edges. Board replacement is quoted separately.
What is included
Stripping failed coating, or sanding where stripping is not appropriate; Cleaning and brightening to restore pH and open the grain; Replacing rotted or split boards and resetting popped fasteners; Stain matched to the exposure and to what the wood will still accept; Railings, balusters and fascia included rather than quoted as an extra; Fences done section by section with the same preparation.
Where we work
Woodland Park and the surrounding Teller County, including Sunnywood, Tranquil Acres, Paradise Estates.
Getting a quote
Free and no obligation. Call (719) 963-7440 or request a quote online.

A horizontal wood surface at 6,000 feet takes more punishment than any other part of a house. It gets UV all day, standing snow all winter, and foot traffic on top. Stain on a deck simply does not last as long as paint on a wall, and any company promising otherwise is setting up a complaint. What determines whether you get three good years or one is entirely what happens before the stain goes on.

What this means in Woodland Park specifically

Siding and paint substrates here

Heavy use of stained wood, cedar and log construction. Extreme UV at this elevation destroys coatings on south and west elevations far faster than most homeowners expect, and stain maintenance intervals here are roughly half what they are at 6,000 feet.

Snow load and ice damming

At 8,465 feet this is the heaviest snow load in our service area by a wide margin. Sustained load, ice damming and meltwater intrusion are the defining roofing problems. Ventilation, eave membrane coverage well past the wall line, and proper snow retention on metal roofs are not upgrades here, they are the job.

Wind exposure

Exposed ridgelines and mountain terrain produce strong, gusty wind with rapid direction changes. Combined with heavy snow, uplift and wind-driven snow intrusion under courses are both real.

Woodland Park sits at approximately 8,465 feet.

What is included

  • Stripping failed coating, or sanding where stripping is not appropriate
  • Cleaning and brightening to restore pH and open the grain
  • Replacing rotted or split boards and resetting popped fasteners
  • Stain matched to the exposure and to what the wood will still accept
  • Railings, balusters and fascia included rather than quoted as an extra
  • Fences done section by section with the same preparation

How we do it

  1. 1

    Assess whether it is worth coating

    Some decks are past it. Widespread checking, soft boards and split ends mean the honest answer is board replacement or rebuild, and stain on a failing deck is money spent making it look briefly better.

  2. 2

    Strip and clean

    Old coating off, mildew and graying removed. This is the majority of the labor and it is the step that gets skipped on a cheap quote.

  3. 3

    Brighten and let it dry

    A brightener neutralizes the cleaner and reopens the grain so stain penetrates instead of sitting on top. Then the wood has to dry properly — staining damp wood is the most common cause of premature failure.

  4. 4

    Apply to refusal

    Penetrating stain goes on until the wood stops taking it, then excess is wiped. Stain left sitting on the surface forms a film, and film on a walking surface peels.

What it costs

Generally 3 to 7 dollars per square foot depending on whether the old coating strips easily, how much railing there is, and the board condition. Railings and balusters cost more per square foot than decking because they are almost all edges. Board replacement is quoted separately.

We quote Woodland Park properties before starting, and the number you hear is the number you pay. If something on site changes the scope, you hear about it before we do the work rather than on the invoice.

Neighborhoods we serve in Woodland Park

Sunnywood, Tranquil Acres, Paradise Estates, and everywhere else in Woodland Park.

Fully Insured
Free Photo-Documented Inspection
Written Scope Before You Sign
Locally Owned & Operated

Decks & Fences questions from Woodland Park

How often does a deck need re-staining in Colorado?

Horizontal surfaces every 2 to 3 years, vertical surfaces like railings and fences considerably longer. UV at this elevation is roughly 25 percent more intense than at sea level, and the snow that sits on a deck for weeks is harder on a coating than rain that runs off.

Solid stain, semi-transparent, or clear?

Solid lasts longest and hides grain entirely, and once you go solid you are effectively committed, because getting back is a stripping job. Semi-transparent shows the wood and needs more frequent renewal. Clear sealers give the least UV protection of the three despite what the name suggests.

Can you stain a new deck right away?

Not usually. New pressure-treated lumber often carries too much mill glaze and moisture to accept stain, and typically needs several months to weather. Staining it too early is the most common reason a new deck fails within a year. Cedar and redwood are more forgiving.

My deck is graying. Is it ruined?

No. Graying is UV breaking down surface lignin and it is cosmetic. A cleaner and brightener will bring the color back on wood that is otherwise sound. Soft spots and splitting are the real problems, and those are different.

Deck & Fence Staining in Woodland Park

Free quote, an honest answer about what is achievable, and no pressure either way.